Version 4.0 - May 14th, 2012

The following is an overview of the new functionality in version 4.0 of 010 Editor:

• Streamlined interface with a simplified tool bar.
• Easier, more intuitive way to run Templates or Scripts using the File Bar above each editor.
• Added support for word wrap and text files with a huge number of lines.
• Tools such as Find, Replace, Find in Files, Goto, Select Range are now displayed in a bar below each editor for a better workflow.
• Can customize the Auto Inspector using a custom Template.
• Revamped Find tool allows searching for variables in the Template Results.
• When a Find All or Find in Files is done on a text file, all text lines that contain a match are listed.
• Added 'Search > Find Strings' dialog for listing all strings in a hex file.
• Can visually swap bytes in the hex editor without modifying the underlying data.
• Can restore all open files when 010 Editor is restarted (select 'Restore all open files' on the Startup page).
• Comments can now specify a custom function using '<comment=<function_name>>'.
• Printf function now does type checking and automatically casts parameters.
• Templates can now read from or write to other files when granted special permission.
• Over 45 new functions for Scripts and Templates.

The following is a list of all new features in version 4.0 of 010 Editor:

• General
  • Simplified the tool bars and updated some icons.
  • File Bar above each editor provides a more intuitive way to run Templates or Scripts.
  • Can restore all open files when 010 Editor is restarted (select 'Restore all open files' on the Startup page).
  • View menu now shows different options when using a text-based interface or hex-based interface.
  • In the Workspace, can sort the list of recent files by Name or by Time using the right-click menu (sort by Time is the default now).
  • Startup page has been redesigned with resizable sections.
  • Can customize the polynomial and initial value for CRC checksums.
  • Added more options to the 'View > Addresses' menu.
  • Use 'View > Addresses > Shorts' for displaying addresses as words (all addresses are divided by 2).
  • Can switch File Interfaces using the Edit As section of the File Bar.
  • Right-click on the Output panel to Copy All, Export Text, or Clear.
  • Can apply Highlighting rules by Shorts.
  • The Welcome dialog allows inputting a license when 010 Editor is in trial mode.
  • Added '-saveall' command line option.
  • Added 'Copy File Path' command to the File Tab right-click menu.
  • Synchronize Scrolling now only scrolls files that are visible.
  • Cannot change a hex-based interface to a text-based interface or vice versa.
  • When opening a file that is already opened, the file is selected before being asked to create a duplicate.
  • Right-click on the application when all tabs are closed for an option to show the Startup Page.
  • Removed comment column for bookmarks (currently unused).
  • 010 Editor configuration file is saved more often.
  • Configuration file now stored in 'Users\<Username>\AppData\Roaming\SweetScape\010 Editor\010Editor.cfg' on Windows.
  • Windows Explorer right-click menu now lists '010 Editor' instead of '010 Editor v3'.
  • Updated help viewer.
• Text Editor
  • Added support for text files with huge numbers of lines.
  • Any long text lines over the maximum line length will be split into multiple lines and marked by '-' in the address column.
  • The maximum line length can be set using the Text Editor Options dialog.
  • Clicking after the last line always moves the cursor to the last byte.
  • Hide the Group By, Division Lines, Left Area, Right Area, Line Width options in the View menu for text files.
  • Word Wrap
    • Can automatically wrap lines that are longer than the text editor window with 'View > Linefeeds > Toggle Word Wrap' or Ctrl+;.
    • Word Wrap can be turned on automatically using 'View > Linefeeds > Initial Wrap State > Auto-detect'.
    • '/wrap' is displayed in the Edit As section of the File Bar above each editor when Word Wrap is turned on.
    • Can wrap on the window edge or a custom column using 'View > Linefeeds > Wrap Width'.
    • Can wrap on letters instead of words using 'View > Linefeeds > Wrap Method'.
    • Word Wrap is supported for files with a large number of lines.
  • Byte-Order Marks
    • Added better support for working with Byte-Order Marks (BOMs).
    • Auto-detect UTF-8 BOMs.
    • Status Bar displays '+B' when a BOM is present.
    • Add or remove BOMs using 'Tools > Convert'.
    • Can auto-add BOMs to new files using the File Interface Options dialog.
• Hex Editor
  • Can visually swap bytes in the hex editor without modifying the underlying data.
  • Bytes can be swapped in groups of 2, 4, 8, etc. (use 'View > Group By' menu to enable).
  • Display 'LIT<>' in the status bar when swapping bytes is enabled.
  • Set the number of bytes per line in a hex editor using 'View > Line Width'.
  • Hide the Linefeeds and Tabs/Whitespace options in the View menu for hex files.
• Find
  • Find/Replace/Find in Files/Replace in Files now performed from a bar at the bottom of the editor.
  • When a Find All or Find in Files is done on a text file, all text lines that contain a match are listed.
  • Revamped Find/Replace tools with icons for Find/Replace Next/Previous.
  • Added 'Search > Find Strings' dialog for listing all strings in a hex file.
  • Can search for Variables in the Template Results using the Find Bar.
  • Selecting a Find occurrence in the editor highlights that occurrence in the Find results.
  • Can list all replacements after doing a Replace All (see 'Show All Replacements' in the Find Bar Options).
  • Lock Find/Replace to a selection using 'Lock Selection' in the Find Bar Options.
  • The locked selection will be colored brown and used for Find/Replace until unlocked.
  • Can display the address in the Find results in more formats.
  • Show or hide the size column in the Find results (hidden by default).
  • Ignoring case and match whole word work better when finding extended unicode characters.
  • Find in Files list updates automatically when the files are edited.
  • Can turn off wrapping for find (see Find Bar Advanced Options).
  • Can list all files when doing a Find in Files operation.
  • Can turn off the use of Find Specifiers using the Find Bar Advanced Options.
  • When searching for Unicode, selected Unicode text is automatically copied to the Find Bar when it is opened.
  • Default to Unicode Find type when finding in a Unicode file.
• Scripts/Templates
  • Use 'Run Script', 'Run Template' or 'Run on File' sections above each editor for running scripts and templates.
  • Comments can now specify a custom function using '<comment=<function_name>>'.
  • Templates can now read from or write to other files when granted special permission.
  • Permissions can be controlled using the Permissions section of the Options dialog and can be turned off for all files.
  • Support searching in the Template Results (use 'Variable Name'/'Variable Value' in the Find Bar).
  • From the Template Results right-click menu, can either expand all nodes of the selected node (Expand all Children of Node) or expand all nodes in the tree (Expand All Nodes).
  • Right-click on a numeric template variable and choose 'Goto > Goto Address' or 'Goto > Goto Sector'.
  • Can override the string displayed in the Name column of the Template Results using '<name="<string>">' or '<name=<function_name>>'.
  • On Windows can right click on a script or template in the Scripts or Templates menu and select 'Edit Script' or 'Edit Template'.
  • Updated included scripts to using RequiresFile and GetScriptName functions.
  • Can run a script on no file by selecting '(none)' in the Run on File section of the File Bar.
  • When doing a CSV export or Copy of the Template Results, the Color field will be converted to a hex color instead of being left blank.
  • An integer with <format=binary> will now show all bytes if zero instead of just the first byte.
  • 'L' string constants now support UTF-8.
  • Prevent running a template on a template.
  • Generate a warning if defining a large number of template variables.
  • Removed variable mouse-over brackets on a text file (was being displayed incorrectly).
• New Functions
  • Can convert between a binary string and an integer (BinaryStrToInt, IntToBinaryStr).
  • Added functions to perform checksums on arrays (ChecksumAlgArrayStr, ChecksumAlgArrayBytes).
  • Can convert strings between various encodings (ConvertString).
  • Added functions to extract path, extension, or base name from a file name (FileNameGetBase, FileNameGetBaseW, FileNameGetExtension, FileNameGetExtensionW, FileNameGetPath, FileNameGetPathW, FileNameSetExtension, FileNameSetExtensionW).
  • Can search for an open file in the editor (FindOpenFile, FindOpenFileW).
  • Can retrieve environment variables (GetEnv).
  • File attributes for Windows or Unix files can be retrieved or changed (GetFileAttributesUnix, GetFileAttributesWin, SetFileAttributesUnix, SetFileAttributesWin).
  • Retrieve the character set of the current file (GetFileCharSet).
  • Get or set which file interface is being used for the current file (GetFileInterface, SetFileInterface).
  • Retrieve the name of the current script or template being run (GetScriptName, GetScriptNameW, GetScriptFileName, GetScriptFileNameW, GetTemplateName, GetTemplateNameW, GetTemplateFileName, GetTemplateFileNameW).
  • Provided function to get a temporary file name (GetTempFileName).
  • Can get or set the current working directory (GetWorkingDirectory, GetWorkingDirectoryW, SetWorkingDirectory, SetWorkingDirectoryW).
  • Provided function to perform any of the Hex Operations in the Tools menu (HexOperation).
  • Can calculate the length of a null-terminated string in a file (ReadStringLength, ReadWStringLength).
  • Provided function to ensure that a script is being run on a target file (RequiresFile).
  • Can write a message to the status bar (StatusMessage).
  • Convert strings easily to UTF-8 format (StringToUTF8, WStringToUTF8).
  • Can convert characters to upper or lower case (ToLower, ToLowerW, ToUpper, ToUpperW).
  • Can convert from a text column to an address (TextColumnToAddress).
• Function Updates
  • Printf function now does type checking and automatically casts parameters.
  • Interface type can be specified for the FileOpen and FileNew functions.
  • GetFileName returns a UTF-8 string.
  • FileOpen will now accept a UTF-8 string.
  • FileOpen no longer pops up an error message if the file could not be found.
  • Better handling of opening duplicate files with the FileOpen function.
  • Can specify a different character set in the StringToWString and WStringToString functions.
  • MessageBox supports UTF-8 encoding.
  • RunTemplate can be run with no arguments to rerun the Template associated with the current file.
  • Added argument to the RunTemplate function to prevent clearing the Output panel.
  • SubStr/WSubStr now default to -1 instead of 0.
  • Can specify a custom date format in the functions GetCurrentTime, GetCurrentDate, GetCurrentDateTime, StringToDosDate, StringToDosTime, StringToFileTime, StringToOleTime, StringToTimeT, DosDateToString, DosTimeToString, FileTimeToString, OleTimeToString, and TimeTToString.
  • Can set the maximum wildcard length in the FindAll, FindFirst, FindInFiles, and ReplaceAll functions.
  • Removed HTML tag processing from Printf.
• Selections
  • 'Edit > Select Range' tool now displays a Select Bar at the bottom of the editor.
  • When selecting bytes while the Select Bar is open, the Select Bar will update to display the selection.
  • Right click on an editor and choose 'Select > Mark Selection Start' or 'Select > Mark Selection End' to set the selection.
  • Added Save Selection to the editor right-click menu.
  • Save Selection automatically appends the start/size of the selection to the file name.
• Inspector
  • Can customize the Auto Inspector (right-click the Inspector and choose 'Customize...').
  • Auto Inspector can be set to use a custom template (by default the 'Inspector.bt' file is included with 010 Editor).
  • Data types can be reordered or deleted from the Auto Inspector using the custom template.
  • Any data type (including Custom Variables) can be added to the Auto Inspector using the custom template.
• Goto
  • 'Search > Goto' tool now displays the Goto Bar below the editor.
  • Use the Goto Bar to jump to a byte, line, sector or short in a file.
• Options
  • Can set the maximum line length for text files.
  • Can set the auto-hide time for bars in the application (Find Bar/Replace Bar/Goto Bar/Select Bar/etc.).
  • Added option to remember the last used File Interface, Endian, and Word Wrap for a file.
  • Allow setting the color for the Find Selection Lock.
  • Must specify whether a File Interface is text-based or hex-based when the interface is created.
• Mac OS X
  • Now use Ctrl+G for Find Next and Ctrl+Shift+G for Find Previous on the Mac.
  • Now use Ctrl+L for Goto and Ctrl+Shift+G for Goto Again on the Mac.
  • Add File Proxy icons to the Application Window (drag to other Windows to open).
  • Removed icons on the menu for Mac.
  • Removed icons on sub-windows for Mac.
  • Fixed order of some OK/Cancel buttons on the Mac.
  • Fixed Windows Clipboard should be called Macintosh Clipboard on the Mac.
• Hotkeys
  • Ctrl+E now toggles between Big and Little Endian.
  • Word Wrap can be toggled on or off using Ctrl+;.
  • Can access Options dialog using Ctrl+, on Windows.
  • Changed close window hotkey to Ctrl+W.
  • Changed close all window hotkey to Ctrl+Alt+W.
  • Fixed issue with Previous Tab shortcut.
  • Can show or hide the File Bar above each editor using Ctrl+/.
• Bugs
  • Fixed bug copying large blocks of data to other applications.
  • Fixed issues with editing UTF-8 characters.
  • Fixed crash when a startup script was missing.
  • Fixed constants in the form 0B?h.
  • Fixed crash in certain invalid assignments to a struct.
  • Fixed bug with extra character when casting from a string to a wstring.
  • Fixed bug with switch statement when default was the first statement.
  • Fixed a case where a non-terminated string could potentially cause a crash.
  • Fixed case where the Close All icon enabled state was not correctly set.
  • Fixed case when Close All could cause the Floating Tab Group to be displayed.
  • Fixed case where Close All Except This could close the wrong files.
  • Fixed bug with assigning to a negative float or double.
  • Fixed issue with using return in a function with no return value.
  • Fixed OutputPaneCopy/OutputPaneSave missing the last row if no linefeed.
  • Fixed case where commented lines were colored incorrectly when jumping through a file.
  • Fixed crash in the Inspector with certain rare Unicode strings.
  • Fixed bug with FindFirst/FindAll when size=0 and start>0.
  • Fixed bug with FindFirst/FindAll and finding Unicode values.
  • Fixed bug with FindNext/FindAll using dir=-1.
  • Fixed FPrintf(newFile,"%c",0) now works properly.
  • Fixed issue with all red text in the Output panel.
  • Fixed case when a Hex file is split and then scroll down, the ruler would not be displayed correctly.
  • Fixed InputOpenFileName/InputOpenFileNames not using the default file name.
  • Fixed AddBookmark can add bookmarks in any of the base types without first running a template.
  • Fixed bug with '//' after #define.
  • Fixed constants COMPARE_SYNCHRONIZE and COMPARE_SIMPLE were switched.
  • Fixed rare crash when running templates and progress issues.
  • Fixed crash calling TextReadLine with an empty string.
  • Fixed possible crash with MessageBox function when using only two parameters.
  • Fixed issues with Copy/Paste from Hex Bytes with Unicode files.
  • Fixed DOS linefeeds being transformed to Unix linefeeds when copying to the Find Bar.
  • Fixed running a comparison can cause empty an Floating Tab Group to be displayed.
  • Fixed a possible crash with an infinite recursion script.
  • Fixed issues with character sets in the Find results window.
  • Fixed correctly detecting when a file read-only flag is changed outside 010 Editor.
  • Fixed Export CSV automatically adds quotes around items containing commas.
  • Fixed in split-view mode, the selection could move after editing.
  • Increased amount of memory the undo stack is allowed to use.

Version 3.2.2 - August 8th, 2011

• Added support for Mac OS X Lion.
• Fixed losing registration problem on Mac OS X Lion.
• Fixed problem with loading the help file on the Mac.
• Now generate an error when accessing member variables inside a 'size' function.

Version 3.2.1 - July 13th, 2011

• Mac OS X version is now a 32-bit program instead of 64-bit.
• Changed close window hotkey on the Mac to Command+W.
• Fixed Windows context menu in 3rd party applications including Directory Opus.
• Fixed problem with Unicode searches and wildcards.
• Fixed showing the help file when minimized and then a topic is loaded.
• Fixed showing 010 Editor when minimized and the Windows context menu is clicked.
• Fixed inputting certain floats or doubles in the Inspector on Windows.
• Fixed Copy As and then paste to other applications with big-endian Unicode text.
• Fixed date in release notes.

Version 3.2 - June 17th, 2011

The following is an overview of the new functionality in version 3.2 of 010 Editor:

• 010 Editor is now available for Mac OS X.
• On-demand parsing of templates using <size=...> for lower memory usage.
• Can set fonts for the Template Results, Inspector, etc in the Options dialog.
• 'New' on the file menu now lists all types of files available for creation.
• Can pass arguments into scripts or templates from the command line.
• New functions for accessing process information in scripts or templates.
• New functions for easier reading and writing of text files.
• Can export or import a list of scripts or templates from the Options dialog.
• New help viewer with tabs.

The following is a list of all new features in version 3.2 of 010 Editor:

• General
• 010 Editor is now available for Mac OS X.
• Can set fonts for the Template Results, Inspector, etc in the Options dialog.
• 'New' on the File menu now lists all types of files available for creation.
• Each file interface can either use the default text or hex font or a custom font.
• Separate insert/overwrite state for text and hex files.
• Can click INS/OVR in the status bar to toggle insert state.
• Histogram hotkey changed to Ctrl+Shift+T.
• Added option on the Help Menu to view the Release Notes.
• 010 Editor does a better job converting text data between formats when copying text between files with different character sets.
• Can set a custom color format for 'Edit > Insert Color' in the Options dialog.
• Non-ANSI characters now supported in Bookmark names.
• Release notes added to the manual instead of separate text file.
• Command Line
• Can pass arguments to a script or template using the form: -script:File.1sc:(arg1,arg2)
• Added ',a' specifier to the '-replace' command to replace in all open files.
• '-h' now displays the manual command line page instead of a separate dialog.
• Templates and Scripts
• On-demand parsing of templates using <size=number> or <size=function_name> for lower memory usage.
• Can export or import a list of scripts or templates from the Options dialog.
• Added ifdef constant for Windows (_010_WIN) and Mac OS X (_010_MAC).
• Added ifdef constant for 64-bit versions (_010_64BIT).
• Non-ANSI characters now supported in comments (use UTF-8).
• Functions
• Added GetFileNameW function to get the wide-string version of the current file name.
• FileSave function can accept a wide-string or no string at all to save to the current file name.
• Added ExpandAll function to open all nodes in the Template Results.
• Added ExportCSV to save the Template Results to a comma-delimited file.
• GetNumArgs, GetArg, and GetArgW functions can be used to retrieve special arguments passed from the command line.
• IsNoUIMode function returns true if 010 Editor is being run in '-noui' mode.
• RunTemplate function now returns the return value from the template that was executed.
• FileOpen now returns the file index of the file that was opened.
• Process information can be returned using the functions ProcessGetHeapLocalAddress, ProcessGetHeapModule, ProcessGetHeapSize, ProcessGetHeapStartAddress, ProcessGetNumHeaps, ProcessHeapToLocalAddress, and ProcessLocalToHeapAddress.
• Added functions to read or write text data in the editor including TextAddressToLine, TextAddressToColumn, TextGetNumLines, TextGetLineSize, TextLineToAddress, TextReadLine, TextReadLineW, TextWriteLine, TextWriteLineW.
• Bug Fixes
• Fixed some foreign characters in names not working in the Register dialog.
• Fixed the temp directory displaying a short path name.
• The documentation listed the incorrect return value for the StringToDosDate, StringToDosTime, StringToFileTime, StringToOleTime, and StringToTimeT functions.
• Fixed bug with multi-line defines and dos-style linefeeds.
• Fixed bug resetting shortcuts where the interface was not updating properly.
• Insert Date/Color should work now for Unicode files.
• Fixed issues with certain input method editors that caused them to not work properly.
• Now display error message when trying to set linefeeds to 'Auto Detect' while in binary mode.
• Fixed bug where the Close All icon should be available when the startup tab is selected.
• Fixed InputSaveFileName function not properly using the default file name.
• Fixed an undefined variable in a script could be displayed as an error in an associated template.
• Fixed redraw bug in the Base Converter.
• Fixed some code examples in the help file.
• Fixed occasional problem drawing underscores.
• Fixed template variables sometimes not accessible after calling RunTemplate.
• Fixed open icon in the tutorial on Windows 7.
• Fixed Histogram panel initial size on Windows 7.
• Fixed the size of the Hex Operations dialog on Windows 7.
• Fixed accessing new file created during a call to RunTemplate.

Version 3.1.3 - November 10th, 2010

• Fixed possible Windows DLL exploit (see https://www.microsoft.com/technet/security/advisory/2269637.mspx).
• Fixed crash using Export CSV with very large datasets.
• Fixed compile errors using DOS style linefeeds after preprocessor statements.
• Fixed crash on comparing large files.
• Fixed occasional problems with button labels in message boxes.
• Fixed some button sizes on Windows 7.
• Now opening .lnk and .url files will load those files directly, not the files to which they link.
• Updates for installing from a CD.

Version 3.1.2 - May 21st, 2010

• Fixed crash with 'Run as administrator' on Windows 7 x64 machines.
• Fixed some constants being incorrectly identified as 'int64' instead of 'int'.

Version 3.1.1 - May 5th, 2010

• Fixed Windows Explorer shell extension on Windows 7 x64 machines.
• Template results now display ASCII strings in the current file character set.
• Fixed error if a script or template included more than 16 files.
• Fixed error using sizeof operator to calculate the size of a struct.
• Fixed error message with -replace command line option when no values found.
• Fixed behavior comparing int -1 to 0xffffffff to be consistent with 3.0.

Version 3.1 - February 16th, 2010

The following is an overview of the new functionality in version 3.1 of 010 Editor:

• Support for the UTF-8 character set.
• Support preprocessor directives #define, #ifdef, #ifndef, #else, etc.
• Support for wstring and wchar_t in Scripts/Templates (unicode strings).
• Use -noui to run 010 Editor without a user interface for batch files.
• Template variables can now have comments (e.g. <comment=""> after a variable).
• New options when defining template variables: <fgcolor=???>, <bgcolor=???>, <open=true|false|suppress>, <hidden=true|false>.
• Can pass arguments into structures.

The following is a list of all new features in version 3.1 of 010 Editor:

• Editor
• Support the UTF-8 character set.
• Added 'UTF-8' and 'Binary' to the 'Edit As' drop-down list.
• Added support for Ctrl+Ins(Copy), Shift+Ins(Paste), and Shift+Del(Cut).
• Shows a current column position arrow in the text editor ruler.
• Soft hyphen (0xAD) displayed as hyphen instead of space.
• Command Line
• Use -noui to run 010 Editor without a user interface for batch files.
• Added -nowarnings to disable display of message boxes when using -noui.
• Can run comparisons from the command line with -compare.
• Added -exitnoerrors to close 010 Editor only if there are no script or template errors.
• Histogram
• Char column in histogram displays the current file character set.
• Bookmarks
• Toggle Bookmark (Ctrl+F2) makes a bookmark for the whole selection, not just the selected byte.
• Compare
• If exactly two files are open, they will automatically be filled in the Compare dialog when opened.
• Can run comparisons from the command line.
• Increased number of internal allowed differences in comparison algorithm.
• Options
• Can hide the splash screen on startup (only when the software is registered).
• Control the color of the caret.
• Can change the input-method editor (IME) color.
• Can control the ruler column marker arrow color.
• Templates and Scripts
• Can display comments for variables using <comment=""> syntax after a variable.
• Can set the color of a variable using <fgcolor=???> or <bgcolor=???> after a variable (for example, <fgcolor=cBlack, bgcolor=0x803020>).
• Can use <open=true|false> after a variable to have a variable open by default.
• Can use <hidden=true|false> after a variable to hide variables.
• Can use <open=suppress> after a variable to prevent it opening during Expand All.
• Can pass arguments into structures.
• Support #ifdef, #ifndef, #define, #undef, #endif, #else, #warning, #error preprocessor directives.
• Added support for unicode strings (wstring/wchar_t).
• Can use L to indicate wide-string constants (e.g. L"dog").
• Bitfields and enums can now work together.
• Can now call functions in templates from scripts.
• Enum values can now be any expression.
• Better handling of int64 constants (auto-detect).
• Added current template directory to include path search.
• Use Ctrl+Left/Right/Enter for better navigation in the template results tree.
• Double-click on an error or warning takes you to the source code line.
• Enum list items can be selected on single-click instead of double-click.
• Support showing local variables inside a struct.
• Correctly update focus highlight in Variables tab when switching files.
• Can cast time types to ints or floats.
• Updating variable coloring rule so colors are properly propagated from parents to children.
• Exec function is no longer allowed in a template.
• New Functions
• Can run a template from a script (RunTemplate).
• Can set bookmarks from a script or template (AddBookmark, GetBookmarkName, GetBookmarkPos, GetNumBookmarks, RemoveBookmark).
• Added new clipboard functions (ClearClipboard, CopyStringToClipboard, GetClipboardString).
• Get the current time (GetCurrentTime, GetCurrentDate, GetCurrentDateTime).
• Added an Assert function.
• Convert a variable such as int or float to bytes (ConvertDataToBytes).
• Retrieve the current temporary directory (GetTempDirectory).
• Control the output panel where Printf data is displayed (OutputPaneClear, OutputPaneSave, OutputPaneCopy).
• Can wait for a certain number of milliseconds (Sleep).
• New wstring (unicode string) functions: InputWString, ReadWLine, ReadWString, StringToWString, WMemcmp, WMemcpy, WMemset, WriteWString, WStrcat, WStrchr, WStrcmp WStrcpy, WStrDel, WStricmp WStringToString, WStrlen, WStrncmp WStrncpy, WStrnicmp, WStrstr, WSubStr.
• Can determine if a function exists with 'function_exists' keyword.
• Exec function has a parameter to wait until execution is finished before returning.
• FileOpen can execute the template associated with a file.
• Can access the current structure variable with 'this' keyword.
• Can access the parent of a structure variable with 'parentof' keyword.
• General
• Installer can warn user if installing a version that will require an upgrade.
• Register dialog button displays 'Cancel' instead of 'Continue' to prevent confusion.
• Temp directory can pick up the TEMP system variable.
• Add Ctrl+Enter shortcut in Find in File results (keeps focus on Output Window).
• Better handling of multiple versions of the configuration file.
• Configuration file should be less prone to corruption.
• Bug Fixes
• Fixed templates variable arrays if the size of the array is greater than 2 GB.
• Fixed bug where a file could display no data after canceling a script or template.
• Fixed bug drawing the ruler when certain fonts are chosen.
• Now correctly report physical disk size on Windows XP or higher.
• Improved error message when using shift operators.
• Improved error message when defining a structure twice with typedef.
• Fixed empty structure warning when using bitfields and no padding.
• Fixed bug with drawing Fg: in the template results.
• Fixed bug selecting bytes in Unicode.
• Fixed bug extending a selection with Shift+click.
• Fixed reading bookmarks containing enums.
• Fixed opening files containing '@'.
• Fixed importing a hex text containing very long lines.
• Fixed using bitfields mixing named and unnamed variable.
• Fixed auto-detect of decimal import text.
• Fixed bug using post increment during array access.
• Fixed printfs sometimes being colored red after an error.
• Fixed syntax highlighting issue with quotes.
• Fixed possible crash with the FileClose function.
• Fixed error message when defining struct variables incorrectly.
• Fixed a typo in the welcome dialog.
• Fixed issue with the syntax highlighting menu.
• Fixed an issue with double-clicking on find-in-file results.
• Fixed Variables Tab not being updated correctly after running a script.
• Fixed issue working with files that are deleted.
• Fixed issue passing strings to functions which are then passed to other functions.
• Fixed selecting issue by dragging over the last line in the text editor.
• Fixed negative enums.
• Fix for optimizing warning on struct that just contains a 'string' variable.

Version 3.0.6 - October 26th, 2009

• Fixed importing hex text with very long lines.
• Fixed templates which mixed bitfields and regular variables.
• Fixed Printf with '%%'.
• Fixed issues on Windows 7.

Version 3.0.5 - April 13th, 2009

• Now support Input Method Editors (IMEs) for multi-byte character sets.
• Fixed bug with Find dialog and multi-byte character sets.
• Fixed problem with backspace and multi-byte character sets.
• Fixed possible buffer overruns running templates and scripts (as reported by Bach Khoa Internetwork Security (Bkis) - http://security.bkis.vn/).
• Fixed problems with the FindFirst and ReplaceAll functions.
• Scripts and templates now support '0h' as well as '00h'.
• Fixed bug in displaying warning message about optimized arrays.
• Fixed crash using Overwrite Bytes on a large drive.
• Fixed possible crash when closing a file after a comparison.
• Fixed not being able to open certain logical and physical drives.
• Fixed bookmarks being deleted when overwriting a block of data.
• Fixed being able to open Unicode filenames from the Windows Explorer right-click menu.

Version 3.0.4 - February 6th, 2009

• Fixed issues with displaying Japanese and Chinese character sets.
• Updated character handling engine for non-ASCII character sets.
• Fixed restoring the maximized state of 010 Editor on restart.
• Fixed possible crash when opening files from Windows Explorer right-click menu.
• Fixed issues with properly refreshing the Inspector values.
• Fixed crash in Replace dialog.
• Fixed crash when setting certain Group By values.
• Fixed issue with certain foreign characters in the Register dialog.
• Fixed typo in the calculator.

Version 3.0.3 - October 17th, 2008

• Improved memory handling for running very large templates.
• Fixed possible crash with syntax highlighting.
• Fixed possible crash running a script with a long line.
• Fixed some Unicode rendering issues in the hex editor.
• Fixed crash with exporting a text area from a Script in certain cases.
• Fixed the find in selection not working properly in certain cases.
• Fixed disabled/enabled problems with buttons in the find dialog.
• Fixed a problem with the ',' constant in scripts.
• Fixed error message for attempting incorrect operations on structs.
• Fixed possible crash using the StrDel function.
• Fixed typo in script cancelled error message.
• Can now copying Unicode data to the clipboard correctly.

Version 3.0.2 - August 28th, 2008

• Automatically hide empty floating tab group on startup.
• Fixed crash with inspector when displaying certain characters.
• Fixed focus issues when loading files via the Windows explorer right-click menu.
• Fixed potential crash with -exit command line option.
• Bug fix for Keep File Time functionality.
• Fixed crash closing deleted files in certain cases.
• Allow custom read/write functions to work with equivalent types.

Version 3.0.1 - July 16th, 2008

• Bug Fixes
  • Fixed periodic hangs when using the Explorer tab to browse a network drive.
  • Fixed international character set issues.
  • Fixed some keyboard keys not working on international keyboards.
  • Fixed possible crash with Copy As Hex Bytes.
  • Fixed replace up missing some occurrences in certain cases.
  • Fixed visual issues editing Unicode hex data.
  • Fixed using the clipboard when some specialized clipboard managers were installed.
  • Fixed progress update on running some scripts.
  • Fixed issues with the scope of local variables between functions and structs.
  • Fixed problem with empty statements inside a switch statement.
  • Fixed a reporting issue with Byte by Byte comparisons.
  • Fixed being able to run the Calculator on other files in the interface.
  • Fixed occasional crash when opening files when all windows were closed.
  • Fixed display glitch with Output tab showing red text.
  • Fixed tool bar undocking issues.
• General
  • Each Tool Bar can now be resized to be smaller than its contents.
  • Visual changes on Vista machines for more consistency.

Version 3.0 - May 19th, 2008

The following is an overview of the new functionality in version 3.0 of 010 Editor:

• Includes a text editor with syntax highlighting.
• Improved interface with new icons.
• Improved file tabs with close buttons that can be dragged to new positions.
• Can have multiple scripts/templates open at the same time.
• Find/replace, goto, etc. can be applied to templates or scripts.
• Full support for Unicode file names and strings in the application.
• Scripts and Templates now stored in "My Documents\SweetScape" directory.
• Official support for Windows 98/Me/NT has been dropped.
• A whole range of other improvements.

The following is a list of all new features in version 3.0 of 010 Editor:

• Text Editor
  • Can now edit text, Unicode, or EBCDIC files.
  • Basic support for syntax highlighting for C/C++ files.
  • Support indenting or unindenting text with Tab or Shift+Tab.
  • Added insert date/time and insert color commands.
• Hex Editor
  • Improved visual style for hex editing.
  • Can display addresses in sectors.
• File Tabs
  • Improved tab-based interface with close buttons.
  • Added a floating tab group.
  • Can drag and drop file tabs (even between the floating tab group).
  • Able to have multiple tab groups laid out horizontally or vertically.
• Startup Page
  • Optional startup page shows recent files, latest application news, and tips.
• File Interfaces
  • Added 'Edit As' combo box to switch between editing text, hex, C++, etc. files.
  • Added Ctrl+H shortcut to toggle between text and hex files.
  • Use Ctrl++ or Ctrl+- to enlarge or shrink fonts.
  • Can set status bar and ruler display formats for different file interfaces.
• Find/Replace
  • Added Replace in Files command.
  • Find dialog automatically copies selected bytes to the Value field.
  • Improved status bar for doing long replace operations.
  • Find results update when bytes inserted/deleted.
• Goto
  • Can use goto dialog to jump to an address, line or a sector.
  • Use ',a', ',l' or ',s' options in Goto combo box for address, line or sector.
• Bookmarks
  • Added a Toggle Bookmark command (can be used to add quick bookmarks).
  • Bookmark positions properly update when bytes inserted/deleted.
• Printing
  • Enhanced Print Preview dialog.
  • Printing now works with text files (including Templates and Scripts).
• Tools
  • Improved calculator with input buttons for performing quick calculations using the mouse.
  • Improved conversion utility can be used to convert character sets and/or linefeeds.
  • Improved checksum tool can treat data as ushorts, uints, or uint64s.
  • Improved histogram tool can treat data as other data types.
• Workspace
  • Enhanced the 'Explorer' tab of the Workspace.
• Inspector
  • Added Unicode string to the Inspector.
  • Moved list of available functions to the 'Functions' tab of the Inspector.
• Scripts and Templates
  • Can have more than one script or template open at a time.
  • Find, print, other operations can all be applied to a script or template.
  • Select which script or template to run using drop-down list in the Tool Bar.
  • Results from Printf now displayed in 'Output' tab in the Output panel.
  • Code Editor has been removed and replaced with a Floating Tab Group.
  • Can display local variables in the template results.
  • Add RequiresVersion, ReadInt64, ReadUInt64, WriteInt64, WriteUInt64 functions.
  • Variables defined in script are now displayed in the 'Variables' tab of the Inspector.
  • List of functions now displayed in the 'Functions' tab of the Inspector.
  • Removed size limitation for scripts and templates.
  • Scripts now stored in "My Documents\SweetScape\010 Scripts" directory.
  • Templates now stored in "My Documents\SweetScape\010 Templates" directory.
  • Added default import byte to 'ImportFile' function.
• Register Dialog
  • Improved register dialog lists when Support/Maintenance expires.
  • Can look up forgotten passwords.
  • Can remove license from the current machine.
• General
  • Added tutorial for using Binary Templates.
  • Updated some hotkeys for various tasks.
  • Show current character set, linefeeds, and tabs in the status bar.
  • Synchronized Scrolling now synchronizes scrolling horizontally and vertically.
  • Added Overwrite File and Overwrite Bytes commands.
  • Many dialogs have an expandable 'Options' section.
  • Improved New and Open tool buttons with drop-down list.
  • Full support for Unicode file names and strings in the application.
  • Can use 'File > Revert/Refresh' to update processes or drives.
  • Added -reset and -resetall command line options to reset the interface.
  • Official support for Windows 98/Me/NT has been dropped.
• Options
  • Can control the mouse wheel scroll rate.
  • Can control the directories where Scripts and Templates are stored.
• Bug Fixes
  • Fixed problems with different DPI settings.
  • Fixed problem imported certain base64 files.
  • Fixed occasional crash on shutdown.
  • Fixed disappearing columns on some multi-monitor systems.
  • Fixed crash when deleting multiple files that were open in 010 Editor.

Version 2.1.4 - February 22nd, 2008

• Bug fix with assigning to dates in a script.
• Bug fix with importing long lines.
• Bug fix with memory leak in FPrintf.
• Updated licensing to support version 3 licenses.

Version 2.1.3 - April 5th, 2007

• Workaround for startup problems caused by faulty Microsoft hotfix.

Version 2.1.2 - March 10th, 2007

• Bug fix for 'FindAll' function.

Version 2.1.1 - March 9th, 2007

• Added support for Windows Vista.
• Fixed bug with string compare in scripts and templates.

Version 2.1 - March 5th, 2007

• General
  • Improved right-click menu in Windows explorer.
  • Updated some icons.
• Import/Export
  • Added ability to export as HTML, RTF, or a text area.
  • Can import or export Base64 and uuencoded data.
  • Can use 'Copy As' or 'Paste from' for many different types of data.
• Tab Menu
  • Added right-click menu to file Tabs.
  • Can middle-click on a tab to close a file.
• Command Line
  • Can Replace a string or set of bytes from the command line.
  • Added ability to save or close a file from the command line.
• Scripts and Templates
  • Improved bitfield mode without padding (see BitfieldDisablePadding).
  • Added 'Always on Top' toggle for the Code Editor (from right-click menu).
  • Check to reload script/template if modified by an external program.
• Editor
  • Now able to input characters more than 0x80 into the character area.
  • Added option to remove ':' separators in file addresses.
• New Functions
  • BitfieldEnablePadding/BitfieldDisablePadding for bit streaming.
  • Function for locating files in a directory (FindFiles).
  • Added directory manipulation functions (DirectoryExists, MakeDir).
  • Added function to convert an enum to a string (EnumToString).
  • Functions to convert Dates to strings and vise versa.
  • Exit function can be used to return errorlevel to a batch file.
• Bug Fixes
  • Fixed problem exporting Intel-Hex 16-bit files with custom addresses.
  • Fixed printf functions occasionally detecting the wrong number of arguments.
  • Importing files now properly imports last line if it does not have a carriage return.
  • Fixed sign of variables when doing divisions.
  • Fixed template hints occasionally not displaying correctly.
  • Fixed bug in FileSave function saving to a different filename.

Version 2.0.3 - November 28th, 2006

• Fixed bug with FileSave function.
• Fixed bug with allowing more than one instance.
• Fixed problem with exporting hex text and long lines.
• Now use Exit function to set global errorlevel return value.
• Allow bookmarks on consecutive bytes.
• Fixed bug exporting data from disk or process.

Version 2.0.2 - June 9th, 2005

• Fixed problem in help index with function names not jumping directly to function help.
• Fixed using copy and paste when editing a template variable.
• Fixed problems using Printf on some strings.
• Fixed bugs with custom read functions and forward structs.
• Added uninstall survey.

Version 2.0.1 - April 28th, 2005

• Fixed issues with custom read/write functions.
• Fixed issues with minimize/maximize behaviour.
• Fixed issues with time data formats.
• Bug fixes with canceling operations, resizing, window order, and divisions.

Version 2.0 - March 30th, 2005

The following is an overview of the new functionality in version 2.0 of 010 Editor:

• Added hard drive editing for logical and physical drives.
• Added editing of system processes.
• More powerful interface for viewing template results (results displayed in panel below each hex editor, mouse-over hints, reverse lookup for template variables).
• More powerful scripts/templates syntax (custom functions, custom data types, more standard keywords supported, union support, include support, 44 new functions).
• New Windows XP style.
• Many improvements in tools (new Find in Files tool).
• A whole range of other improvements.

The following is a list of all new features in version 2.0 of 010 Editor:

• Hard Drive Editing
  • Open entire logical or physical hard drives using 'File > Open Drive'.
  • Make disk images for drive using 'File > Save As'.
  • Jump to next or previous drive sector with Alt+Down, Alt+Up.
  • Get properties of the drive using 'Edit > Properties'.
  • Open hard drives from the command line.
• Process Editing
  • Open processes using 'File > Open Process'.
  • Select which heaps or modules to open.
  • Make image of process using 'File > Save As'.
  • Get properties of the process using 'Edit > Properties'.
  • Open processes from the command line.
  • List of current heaps displayed in 'Process' tab of the Output Window.
• Templates/Scripts
  • Templates/Scripts Interface
    • Templates results can now be displayed in the 'Template Results' panel below each hex editor.
    • Application contains links to an online repository for scripts and templates.
    • Display hint for template variable when the cursor is over bytes in the hex editor.
    • New 'Jump to Template Variable' command to lookup a template variable from a file address.
    • Scripts and templates can be opened by double-clicking them in Windows Explorer.
    • Scripts and templates can be run from the command line.
    • Can mark scripts to be run on startup, shutdown, or when certain files are opened.
    • Speed improvements for scripts and templates.
    • Added default shortcut for saving a script or template.
    • Context sensitive help in the Code Editor.
  • Templates/Scripts Syntax
    • Define your own custom functions.
    • Use '#include' keyword to include files.
    • Support for switch, case, break, and continue keywords.
    • Support for unions.
    • Default custom variables using the syntax <read=[functionname], write=[functionname]>.
    • Control whether arrays of structures are optimized with <optimize=true|false>.
    • Specify display format for variable using the syntax <format=hex|decimal|octal|binary>.
    • sizeof now works properly on simple structures.
    • Special new keywords 'exists' and 'startof' for template variables.
    • Array initializers work properly (e.g. int a[3] = {1, 2, 3};).
    • No need to use 'return' when doing simple expressions in the calculator.
    • Changed how scoping works in structs - automatically look up a level.
    • 44 new functions: Checksum, ChecksumAlgStr, ChecksumAlgBytes, Compare, ConvertASCIIToUNICODE, ConvertASCIIToUNICODEW, ConvertUNICODEToASCII, ConvertUNICODEToASCIIW, DeleteFile, Exit, ExportFile, FindAll, FindFirst, FindInFiles, FindNext, FPrintf, GetBytesPerLine, GetReadOnly, GetSectorSize, Histogram, ImportFile, InputOpenFileName, InputOpenFileNames, InputSaveFileName, InsertFile, IsBigEndian, IsDrive, IsEditorFocused, IsLittleEndian, IsLogicalDrive, IsModified, IsPhysicalDrive, IsProcess, OpenLogicalDrive, OpenPhysicalDrive, OpenProcessById, OpenProcessByName, RenameFile, ReplaceAll, SetReadOnly, SScanf, StrDel, SubStr, Terminate.
  • New Templates/Scripts
    • New default scripts for splitting or joining binary files.
    • New default template for parsing a WAV sound file.
• General
  • New Windows XP Style.
  • New 'File > Special > Save Selection' command to save selected bytes.
  • Show selection start and size in the status bar.
  • Click on position or size in status bar brings up an edit dialog.
  • Many tables have an 'Export CSV' option on right-click menu to write a comma-delimited file.
  • Can change read-only plus other flags in file properties.
• Hex Editor
  • Cursor size changes in Insert/Overwrite mode.
  • UNICODE character set support.
  • International character sets support.
  • Can split the hex editor into two parts using 'Window > Split Window' or button above scroll bar.
  • Scrolling can be synchronized between windows with 'Window > Synchronize Scrolling'.
  • Division lines can be used to indicate blocks of data.
  • Sector lines are drawn to indicate sectors on a hard drive.
  • Addresses can be displayed as octal format or as a line number.
• Tools
  • Find in Files tool
    • Can recursively search a directory or all open files for a set of bytes.
    • Display find in files results in 'Find in Files' tab of Output Window.
    • Can expand or hide results for each file.
  • Find
    • Can search with wildcards '*' and '?'.
    • Allow multiple find ranges to color the same file.
    • Find works with UNICODE.
  • Highlights
    • Allow multiple highlights to be applied at the same time.
    • Assign different colors to highlights.
  • Comparison
    • Can limit which bytes are compared in a file (use to compare two regions in the same file).
    • Comparison results are sortable by clicking on the table headings.
    • Add color indicator box to the type column.
    • Can enable synchronized scrolling after running a comparison.
  • Base Converter
    • Support for Float, Double, ASCII strings, EBCDIC strings, UNICODE strings in base converter.
  • Checksum
    • Can exclude a set of bytes in the file from the checksum.
    • Can display the checksum results in decimal format.
• Inspector
  • String type in inspector.
  • Display start address as local (offset from parent) from right-click menu.
  • Template variable name can be 'Type + Name' or just 'Name' (use Column Display Format).
• Bookmarks
  • Bookmarks can now use custom data types defined in Templates.
  • Bookmarks can be set to move when the cursor changes position.
• Importing
  • Do checksum when importing an Intel-hex file.
  • In import file dialog box, can set file type as 'All Supported Import Types'.
  • Can import multiple files at the same time.
  • Support for reading and writing Intel Hex files that use word-based addresses.
• Options
  • Specify color of right area, separator lines, sector lines, and variable highlight.
  • Specify additional include directories.
  • Specify minimum number of digits in address.
  • Option for turning on/off mouse over and hints.
  • Option for adding 010 Editor to the Windows Explorer right-click menu.
• Command line
  • Can open a drive or process from the command line using '-drive:' or '-process:'.
  • Run a script or a template from the command line using '-script:' or '-template:'.
  • Mark a file as readonly using '-readonly'.
  • Exit the application using '-exit'.
  • Can use wildcards when opening files or importing files on the command line.
• Help
  • New improved help file.
• Bugs
  • Bug with window opening at zero height (in special cases).
  • Bug with a slow-down when defining large arrays in scripts.
  • Bug with divisions and the resulting types in scripts (in special cases).
  • Bug with replace all never finishing on certain replaces.
  • Other minor bug fixes.

Version 1.3.2 - April 19th, 2004

• Added functions ConvertASCIIToEBCDIC, ConvertEBCDICToASCII
• Added functions BitfieldLeftToRight, BitfieldRightToLeft
• Bug fixes with Printf, Operations, and local arrays in Templates

Version 1.3.1 - April 6th, 2004

• Changed header for templates and scripts
• Bug fixes for the system path, and the Inspector

Version 1.3 - April 1st, 2004

• Templates
  • Added bitfield support to templates.
  • Added DisplayFormatBinary and DisplayFormatOctal functions.
  • Can disable warnings under 'Tools > Options > Code Editor'.
• General
  • Now use the new XP file dialog boxes.
• Clipboard
  • Can use 'Paste Special' command to paste in different formats.
• Bug fixes
  • Fixed problems with workspace, filling bytes, running templates, pasting large blocks, and selecting bytes on NT machines.

Version 1.2 - Jan 24th, 2004

• Inspector and Output Windows
  • Added 'Copy Column', 'Copy Row', and 'Copy Table' to right-click menu.
  • Added 'Column Display Format' to right-click menu - set the format to hex or decimal.
• Scripts
  • Fixed scripts to work better when writing out large files.
  • Any of the 'Write' functions now automatically expand the file size when writing past the end of the file .
  • A single variable (i.e int x) defined in a template can be accessed as x[0].
  • Added 'DisableUndo' and 'EnableUndo' to turn on or off undo - speeds up script when writing large files.
  • The 'FileNew' function now returns the file number of the created file.
• Import/Export
  • Added the ability to import or export 'Decimal Text'.
• Bug Fixes
  • Fixed 'Invalid Pointer Operation' bug in the Code Editor.
  • Fixed a bug with the 'GetFileNum' function.
  • A few other minor bug fixes with hotkeys and Templates.

Version 1.1.1 - Dec 19th, 2003

• Minor bug fixes with bookmarks and the inspector.
• Added Expand All option to template right-click menu.

Version 1.1 - Nov 1st, 2003

• Templates
  • Support for enums (e.g. 'enum <ushort> MYENUM { COMP_1, COMP_2=5, COMP_3 } var1;').
  • Enums variables are displayed with a drop-down list in the Inspector.
  • Forward declared and recursive structs work properly.
  • Defining local variables inside structs works better (proper scope).
  • Zero-length arrays generate no variable (but do generate a warning).
  • Can specify hex or decimal display in Inspector with DisplayFormatHex() or DisplayFormatDecimal() functions.
  • Zip template now contains an example of enums.
• Installer
  • 010 Editor can be added to the system path automatically.
  • Can automatically associate with Intel Hex or Motorola S-Record files.
• Explorer
  • Can drag-and-drop files from Windows Explorer to open them.
  • Drag-and-drop for Intel Hex or Motorola S-Record files will automatically import them.
• Importing
  • Added default import byte under General Options (used for Intel Hex files).
• Comparison
  • Improved comparison algorithm.
• Bug fixes
  • Minor bug fixes with the Code Editor.

Version 1.0.1 - Sept 26th, 2003

• Minor bug fixes with printing and inspector

Version 1.0 - Sept 16th, 2003

• Initial Release